Switching the BLUETREK ST1® headset ON and OFF
To switch on:
When your headset is off, press and hold the “TALK/ON/OFF” button for about 3
seconds until the blue indicator light is on. A beep (2 tones) can be heard through the
speaker then release the button.
To switch off:
When your headset is on, press and hold the “TALK/ON/OFF” button for about 7 seconds
until the red indicator light is on after the quick blue flashes. A beep (2 tones) can be heard
in the speaker. Release the “TALK/ON/OFF” button .
Making a call
Note: The voice dialing feature is not available on all mobile phones or PDAs. However, you
can always dial directly using your phone keypad. If your mobile phone does offer the voice
recognition feature, you can make a call directly from the headset without touching your
Bluetooth® mobile phone.
Mobile phones with voice dialing
Make sure that the voice dialing functions on your phone are activated and that your voice
tags have been recorded. To program these, please refer to your phone manual.
Press the “TALK/ON/OFF” button (when there is no incoming and no active call). An
audio connection is established.
1
1
1
1
En
gl
is
h
8
