Quick Start Guide - Argos3D – P22X
Last change: 30. August 2017
Version 3
© BECOM BLUETECHNIX 2017
Page 6 | 13
c
Figure 1-2: Argos3D–P22x break-out board backside view
Note
Please follow the next steps in the right order to get your ‘Argos3D-P22x’ up and running
correctly.
1.3.1
Connecting the break-out board
Please connect the break-out board to the Argos3D-P22x common connector first.
Figure 1-3: Argos3D–P22x common connector
1.3.2
Connecting the power supply
To ensure, that your Argos3D–P22x works correctly, connect the ‘Argos3D’ to a
12-30V DC
power supply
using connector
(a)
and wait for approximately 20 seconds until the camera boots up.
Pin assignment on the power connector (a): Pin #1: +12V to +30V, Pin#2: GND
Note