05
contact
[email protected] / [email protected]
PLATINUM SERIES V2
USER MANUAL
Matrix Main Communication Board
T
he Matrix main communication board is located on the rear panel and has the following connections:-
Connections
A. TCP/IP – For control of Matrix (RJ45 Connector)
B. Ethernet – Matrix includes a 10/100 Ethernet switch (RJ45 Connector) -
ARC-V2 verison
C. Global IR Input 3.5mm stereo jack
D. Global IR Output 3.5mm mono jack
E. RS-232 2-way (Phoenix Connector) for 3
rd
party control of Matrix.
TCP/IP
The Blustream Matrix can be controlled via TCP/IP.
For full list of protocols please see ‘RS-232 & Telnet Commands’ located at the rear of
this manual.
A ‘Straight-through’ RJ45 patch lead should be used
RS-232 2-Way
The Blustream matrix can be controlled via supplied 3-pin Phoenix to 9-pin serial
cable.
For full list of 3
rd
party control protocols please see ‘RS-232 & Telnet Commands’
located at the rear of this manual.
Details of RS-232 pin assignment and communication are below:
Baud Rate:
57600 bps
Data Bit:
8-bit
Parity:
None
Stop Bit:
1-bit
Flow Control:
None
A
B
C
D
E
PLA-XX V2
REMOTE CONTROL
CONSOLE
PIN
Assignment PIN Assignment
1
NC
1
NC
2
Tx
2
Rx
3
Rx
3
Tx
4
NC
4
NC
5
GND
5
GND
6
NC
6
NC
7
NC
7
NC
8
NC
8
NC
9
NC
9
NC
TCP/IP
