Bluestream PLA66ARC V2, User Manual, Page: 4 / 21

PLATINUM SERIES V2
USER MANUAL
04
www.blustream.co.uk
1 LCD display – Show the status of input
& output selection and EDID info.
2
IR receiver window – Receives IR from a
hand held remote control or processor.
3 Power LED indicator - Indicates the
power status of the matrix.
4 Power button – Press to toggle power
of the matrix on/off.
5
HDMI output selection button 1 to 8 –
Press to select the output from 1 to 8.
6
All button for HDMI outputs – Press to
select all of the outputs from 1 to 8.
7 Menu button – Press to enter EDID
setup.
8 Up – Press to change up through the
adjustable values.
9 ESC - Press to quit EDID set up menu.
q
Lock LED indicator - Indicate the status
of the key lock.
w
Lock button – Press to lock the buttons
on the front panel (Press and hold for 2
seconds).
e HDMI input selection button 1 to 8 –
Press to select the input from 1 to 8.
r PTP button-Press to mirror all inputs
and outputs (e.g. output 1 to input 1,
output 2 to input 2 and so on).
t
Select – Press to select an EDID
parameter to change. Selected
segment will blink.
y Down – Press to change down through
the adjustable values.
u
Enter – Press to set EDID to specified
INPUT or copy EDID from specified
OUTPUT to specified INPUT.
1 2
10 11 12 13 14 15 16
3
4
5 6 7 8 9
Rear Panel
(PLA88xx model shown)
1
HDMI inputs 1 to 6/8 – Connect HDMI
sources.
2
HDBT inputs 1 & 2 – Connect remote
HDBT transmitter.
3
HDMI outputs 1 to 6/8 – Output for
displays.
4
HDBT outputs 1 to 6/8 – Output for
displays.
5 Ethernet-embedded for LAN serving to
all connected HDBT transmitters and
receivers (ARC models only).
6
RJ45 - TCP/IP control.
7 Power switch.
8
GND – Ground connection.
9 IR outputs 1 to 6/8 – 3.5mm mono
jack for routed IR emitter outputs for
discrete source control.
q L/R stereo inputs 1 to 6/8 – 3.5mm
stereo jack.
w RS-232 port – Connect to this port
for the control of the matrix from a
computer or control processor.
e
IR Inputs 1 to 6/8 – 3.5mm stereo
jack for integration with a control
processor.
r
L/R stereo outputs 1 to 6/8 – 3.5mm
stereo jack.
t Coaxial Digital outputs 1 to 6/8 – RCA
connector.
y Global IR Input – 3.5mm stereo jack.
u
Global IR Output – 3.5mm mono jack.
i
RS-232 Port – 3-pin phoenix terminal.
Front Panel
1
8 9 12 15 10 13 11 14 16 17 18
2 3 5 6 7 4
Panel Descriptions