HEX70B-KIT
USER MANUAL
06
www.blustream.co.uk
The HEX70B is designed to distribute 4K video formats up to 4K 30Hz 4:4:4 & 4K 60Hz 4:2:0. Any video formats above this resolution
cannot be distributed using the HEX70B extender kit.
Please note:
The HEX70B-KIT supports EDID and HDCP 2.2 pass-through which may result in loss of signal should your source be
able to output video signals up to 4K 60Hz 4:4:4 (18Gbps). Due to the limitations in HDBaseT video distribution it is not possible to
pass 18Gbps HDMI over a CAT cable without manipulation of the HDMI signal using scaling, colour space conversion or compression.
Should you experience problems with video distribution please try the following to make sure your source device is outputting a
maximum video format of either 4K 60Hz 4:2:0 or 4K 30Hz 4:4:4
•
Fix the video output resolution within the source device
•
Use an EDID management device on the HDMI output of your source device. This will trick the source device into thinking it is
connected to a lower resolution display of up to 4K 60Hz 4:2:0 or 4K 30Hz 4:4:4
For distribution of video resolutions exceeding the maximum capabilities of the HEX70B extender kit please contact your local
Blustream distributor
4K Video Distribution
Example Schematic
HEX70B-Kit
Cat 5/5e/6
IR Cable
HDMI
70m max
1 SOURCE
DISPLAY
HDMI
IR
POH
A
B
C
A
C
B
HEX70B-Tx
Transmitter
HEX70B-Rx
Receiver