DA11USB
QUICK REFERENCE GUIDE
02
www.blustream.com.au
|
www.blustream-us.com
|
www.blustream.co.uk
Dante Controller
Dante Controller software is required in order to setup and configure the DA11USB as well as control your Dante
network. Audinate provide extensive training videos and documentation on their website. This can be found here:
http://www.audinate.com/products/software/dante-controller
Upon connecting your DA11USB to a compatible network, the Dante Controller software should automatically
discover the device. The DA11USB will appear in the Dante Controller with a name denoted with “DA11USB”. On the
“Routing” screen you can create audio routing between Dante transmitters and receivers in your system.
Please ensure your PC is on the same network as your Dante devices. Dante is not able to transmit over WiFi and it
is recommended to hardwire into the Dante network. Having multiple network devices enabled can also confuse
the Dante Controller software so it is recommended to disable WiFi during configuration.
By default the DA11USB is shipped with its network settings set to obtain an IP Address automatically. This means
that if a DHCP server is present on your network, it will provide the DA11USB with an IP Address. If no DHCP server
is present then the DA11USB will receive a default IP Address in the 169.254.xxx.xxx range. To change the IP Address
of the DA11USB, you must enter the “Network Config” menu in the “Device Info” screen of the Dante Controller
software.
