ENGLISH
ENGLISH
19
18
After the amber temperature pilot light first has gone out and has
come on again, you may start ironing. The amber pilot light will
come on from time to time during ironing.
Iron with low temperature if you do not know what kinds of
fabrics.
WARNING:
If you set the temperature, control a lower setting after ironing at
a high temperature. Do not begin again before the amber pilot
light has come on and gone out again.
The steam control should remain in position 0 (=no steam) and
turn the temperature regulating knob to the temperature scale
which the ironed clothes required, the indicator will light on.
Put the iron on the smooth and stable place vertically.
Begin to iron.
4
5
Dry iron
Ensure that there is enough water in the water reservoir.
Press spray button to produce a fine spray of spray nozzle and
continue ironing.
NOTE:
For delicate fabrics, we recommend moistening the fabric before
hand using the spray function, or putting a damp cloth between
the iron and the fabric. To avoid staining, do not use the spray on
silk or synthetic fabrics.
This feature provides extra steam to remove stubborn creases. The
extra steam works as long as the turbo knob is kept pressed in.
Spray
Turbo steam
Way to use:
Press and hold the shot steam button to generate a powerful burst
of steam that can penetrate the fabrics and smooth the most
difficult and tough creases.
Only use when the steam iron has reached the steam or maximum
temperature.
NOTE:
Do not keep the button pressed-in for more than 10 seconds
without interruption or press it more than 3 times at once.
Allow at least one minute interval before applying turbo steam
again.
If the amber temperature pilot light comes on, this indicated that
the iron is heating up again. Wait for the amber pilot light to go out.
Then you could recommend ironing
By using this function, you could also iron vertically.
Before ironing, at first raise the handle until it locks into position.
For storing, press the lock down to close the handle.
Foldable handle lock
CLEANING
Before cleaning the iron in any way, make sure that the appliance
plug is not connect to socket.
Scale and other setting can be wiped off the soleplate with a damp
cloth and some non-scratch (fluid) abrasive.
To keep the soleplate smooth, you should avoid hard contact with
metal objects.
The upper part of the appliance can be cleaned with a damp cloth,
and then wiped over with a dry cloth.
1
2
3
