ENGLISH
ENGLISH
32
31
SELF-CLEANING (SIB-3808B/ SIB-3826B)
A special resin filter inside the water reservoir softens the water and
prevents scale build-up in the plate. The resin filter is permanent
and does not need replacing.
Please note:
Use tap water only. Distilled and/ demineralised water makes the
anti-calc system ineffective by altering its physicochemical charac-
teristics.
SPECIAL FUNCTION FOR STEAM IRON
The anti-calc feature cleans inside the plate, removing impurities.
The iron automatically stops generating steam when the temperature
is too low to prevent water form dripping out of the soleplate.
In the dry ironing and team ironing of process can be used the ozone
function
Press and hold on ozone button, and the ozone pilot light will light,
the ozone from soleplate of the holes designated spray
Smaller steam particles, deeply get the most difficult ironing fold, and
eliminate the wrinkle to be easier.
ANTI-CALC SYSTEM (SIB-3808B / SIB-3826B/ SIB-3875G)
AUTOMATIC ANTI-DRIP FUNCTION (SIB-3826B/ SIB-3875G)
IONIC STEAMING FUNCTION (SIB-3875G)
CLEANING
Before cleaning the iron in any way, make sure that the appliance
plug is not connect to socket.
Scale and other setting can be wiped off the soleplate with a damp
cloth and some non-scratching (fluid) abrasive.
1
To keep the soleplate smooth, you should avoid hard contact with
metal objects.
The upper part of the appliance can be cleaned with a damp cloth,
and then wiped over with a dry cloth.
USING SELF-CLEANING FUNCTION
(SIB-3808B/ SIB-3826B)
Using a few day later(10-15 days), you should full fill the water tank
with water to the maximum level indicated and set the steam control
to ‘0”.
Set thermostat knob to the maximum temperature; wait for the light
to turn off.
Pull the plug out of the socket and hold the iron horizontally over the
sink.
Push the self-cleaning’s button; it will clean the dirt itself.
3
2
1
2
TO CLEAN MODEL SIB-3875G
Set the steam control knob to position (between “••” to “MAX”).
Fill the water tank to the maximum level.
Put the plug in the wall socket.
Select the maximum ironing temperature.
Unplug the iron when the temperature pilot light has gone out.
Hold the iron over the sink, press and hold the Bust steam button in
5-10 seconds and gently shake the iron to and fro.
Repeat the self clean process if the iron still contain a lot of impurities.
Remove the main plug from the wall socket.
Pour any remaining water out of the water reservoir (water tank)
Set the steam control to position 0.
Stand the iron upright and let it cool down sufficiently.
The main cord can be wound around the cord storage facility.
STORAGE
