ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations: hand in the
non-working electrical equipments to an appropriate waste disposal
center.
FAULT DETECTION
Please contact local service center to do the maintenance.
CODE
CAUSE OF FAILURE
TREATMENT
Over soft, over hard,
over sticky, over
thin, undercooked,
overcooked, rice water
spillage, insufficient
boiling
- Failed to add water
according to the water line.
- Wrong function selected.
- Foreign matter on the
heating disc.
- Steam valve not well
installed.
- Inner pot deformation
- Add water according to the water
line.
- Select the corresponding function.
- Remove the matter from the
heating disc and cook again.
- Install the steam valve in place.
- Contact after-sales service to
replace the inner pot
Bad smell, color
change, or drying
during heat
preservation
- Foreign matters at the
sealing ring and the rim of
the inner pot.
- Air leakage.
- Overlong heat
preservation
- Clean off foreign matters.
-Contact after-sales service to
replace the sealing ring.
- Heat preservation time is
suggested to be no more than 5
hours.
Abnormal sound in
cooking
- Water is not wiped off
from the inner pot.
- Relay on-off sound in
cooking
- Wipe off water from the inner pot
surface before cooking.
- Normal phenomenon
Display show E1
- Main thermistor (bottom
sensor) open circuit.
Pull out and re-connect the power
cord, the display still shows E1,
please send to designated after-
sales service departments for
maintenance
Display show E2
- Main thermistor (bottom
sensor) short circuit
Pull out and re-connect the power
cord, the display still shows E2,
please send to designated after-
sales service departments for
maintenance
Display show E5
- Top lid sensor (Handle
thermistor) open circuit
Pull out and re-connect the power
cord, the display still shows E5,
please send to designated after-
sales service departments for
maintenance
Display show E6
- Top lid sensor (Handle
thermistor) short circuit
Pull out and re-connect the power
cord, the display still shows E6,
please send to designated after-
sales service departments for
maintenance
Display show/flash EU
-Communication Error
Pull out and re-connect the power
cord, the display still shows/flash
EU, please send to designated
after-sales service departments for
maintenance
Put the inner pot into the heating board properly, or the heating board will
be damaged.
Do not put the inner pot on other heating soures to cook or replace it by
other containers.
Do not open the lid when the water is boiling.
To prevent electric shock or damage of rice cooker, do not immerse cord, plug
or product in water or other liquids.
Appliance is not intended for use by person (including children) with reduced
physical, sensory or mental capabilities, or lack of exprerience and knowledge,
unless they have been given supervision or instruction concerning use of
appliance by a person responsible for their safety.
Children should be supervised to ensure that do not play with the appliance.
This appliance must be grounded. It is equipped with a cord having a grounding
wire with a grounding plug. It must be plugged into a wall receptacle that is
properly installed and grounded. In the event of an electrical short circuit,
grounding reduces risks of electric shock by providing an escape wire for the
electric current. It is recommended that the separate circuit serving only the
appliance be provided. High voltage appliance is dangerous and may results
in a fire or other accidents.
If you have any questions about the grounding or electric instruction, consult
a qualified electrician or service person.
Neither the manufacturer nor the dealer can accept the liability for damage of
the appliance or personal injury from failure observe the electrical connection
procedure.
21
22
23
19
18
20
24
25
26
22
23
ENGLISH
ENGLISH
Summary of Contents for RCB-5938
Page 13: ......