Prohibit using it under combustible or moist condition.
Use it in compliance with cooking instruction.
Don’t damage the sealing ring and replace it with others.
Don’t remove the inside ring of lid by manual of force. If the ring separate with
lid, please stop using it and change the lid.
Don’t place any heavy stuff on pressure release valve or replace it by others.
Keep the space between inner pot and heating plate clean. Don’t put inner
pot on other heating source to cook or replace it by other containers.
The inner pot is covered by nonstick paint, please use wooden or plastic ladle
ito prevent scratches on the surface.
The warm keeping time should not exceed 6 hours as it will affect the
cooking flavor.
On course of heating, it is not usual that lots of vapor is generated around the
lid. The pressure release device is functioning to stabilize the system. Pull the
plug off, stop all usage and send it to repair.
In case of any malfunction on course of using, please stop using and send it
to repair.
Use the grip to transport the pressure cooker, not by holding the handle on
the lid.
It’s not suggested that users disassemble the device by themselves or manually
replace any parts. All genuine parts are provided exclusively by the company.
If the supply cord is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its service agent.
Always unplug the appliance after use. Do not unplug by pulling on the cord.
Don’t soak the cooker into water.
Please regularly check the pressure control valve (the pipe inside the pressure
control valve, floating valve, floater) to make sure that they are not stuck.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid hazards.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
ENGLISH
ENGLISH
18
19
1. Exhaust valve
2. Floating valve
3. Push rob
4. Lid handle
5. Top lid
6. Sealing ring
7. Inner pot
8. Inner cover
9. Water box
10. Middle ring
11. Pot handle
12. Control panel
13. Outer shell
14. Heating plate
15. Base
BODY STRUCTURE
1
2
3
5
6
7
8
9
10
11
12
13
14
15
16
4
TECHOLOGY PARAMETER
Model
Voltage
Power
Capacity
Diameter
Working
pressure
Limit
pressure
Keep warm
temperature
PCB-5748
220-240V
~50/60Hz
900W
5L
22cm
0-70kPa
90kPa
60~80
o
C
PCB-5753
220-240V
~50/60Hz
900W
5L
22cm
0-70kPa
90kPa
60~80
o
C
Spoon
Measuring cup
Steamer
SAFETY NOTICE
Summary of Contents for PCB-5748
Page 16: ......