ENGLISH
ENGLISH
Please read these operating instructions through carefully
before connecting your kettle to the power supply. In order to
avoid damage due to incorrect use.
1
Incorrect operation and improper handling can lead to faults on
the appliance and injuries to the user.
2
Unplug the appliance from power supply when not in use.
3
Keep the base unit away from damp and protect from splashes.
4
Do not immerse the unit cord or plug in water or other liquids.
If it occurs, remove the plug immediately and then have the unit
checked by an expert before using it again.
5
Do not operate the appliance if the cord or plug shows signs of
damage.
6
If the appliance has fallen on the floor or has been cases take the
appliance to a specialist for checking and repair if necessary.
7
Ensure that the cord does not hang over sharp edges and keep it
away from hot surfaces.
8
Only pull it out of the power supply by the plug, not by the cord.
9
After pull the plug out, do not touch or put it on flammable
surface because heating element still warm.
10
Do not fill water into the kettle too full because when boiling
water will out flow.
11
Place the appliance on a stable surface, away from hot objects
(e.g. hotplates), naked flames; do not place under curtains or low
wall-cupboards.
12
You should never leave the appliance unattended during use.
13
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
14
Use the kettle only with the base unit supplied, and do not use
the base unit for any other purposes.
15
Never remove the kettle from its base unit while in operation.
Switch the appliance off first.
16
Close the lid properly before switching on. Otherwise, the
appliance will not switch off automatically and hot water may
overflow.
17
The kettle is used for heating water only and is not to be used
for any other liquids.
18
The appliance is designed for household use only.
19
Do not immerse appliance in the water.
20
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
21
Do not open the lid when water boiling.
22
Unplug when take the kettle out of base.
23
Don’t operate the appliance if no have water in the kettle.
24
Children should be supervised to ensure that do not play with
the appliance.
INSTRUCTION FOR USE
SAFETY NOTICE
FIRST TIME USING
1
Remove all packing materials from the kettle.
2
Before connecting of the kettle, check that voltage indicated on
the rating label corresponds the mains voltage in your home.
3
Fill the kettle with cool water up to the “
1.7L
or
1L
” mark and boil
it. Emty the kettle. The appliance is ready for use.
12
13
