Bluestone ICB-6831, User Manual

Page: 19 / 28

INSTRUCTION FOR USE
Attention before using:
- Only use cookware with a base suitable for induction cooker (please refer as
the page 20)
- Place the pan with food on the center of cooking zone.
Note:
- Clean the water, oil or other dirt on the pan before placing it on the appliance.
Please do not place an empty pot on the appliance to avoid any damage or danger.
-At low power (level 1 - 4), only left cooking zone can work continuosly, right
cooking zone runs & stops as normal.
Start cooking:
Note:
If the buzzer beep alternately with the heat settings.
This means that:
You have not placed a pan on the correct cooking zone or.
The pan you’re using is not suitable for induction cooking or.
The pan is too small or not properly centered on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is
placed on it.
1
2
Touch the ON/OFF control for about two
seconds. All the cooking zone indicators show
“-”
Place a suitable pan on the cooking zone that
you wish to use.
Make sure the bottom of the pan and the
surface of the cooking zone are clean and dry.
Select the cooking zone (Left Zone or Right
Zone).
Select a heat setting by touching the “ ” or
“ ” control.
You can modify the heat settings at any time
during cooking.
1200
ENGLISH ENGLISH
18 19