Bluestone HOB-8735, User Manual, Page: 10 / 13

19 18
ENGLISH ENGLISH
c. Fix the one-way-valve to the air
outlet of the cooker hood. Then,
attached the exhaust pipe onto
the one-way-valve as shown below
d. Chimney installation
b. Leave up the cooker hood
and hang onto the wall
bracket hook
Put the upper chimney into lower chimney.
Then pulling out the upper chimney
upwards. Adjust to reach the height required.
Measure the appropriate height and drill
2 x 8mm holes to accommodate the plate.
Screw and tighten the upper wall with 2
screws provided.
Plug the activated carbon filter into the unit
and turn it in clockwise direction. Repeat
the same on the other side.
Note:
1. Make sure the filter is securely locked. Otherwise, it would loosen and cause
dangerous.
2. When activated carbon filter attached, the suction power will be lower.
There are 2 methods for installing the chimney cover. Please check the below
picture for reference
Option 1:
After drilled the 2 holes and fixed the hook, hang the chimney cover by
matching the both side lock. (Picture 1)
Option 2:
After drilled the 2 holes and fixed the hook, install the chimney cover by
locking with 2 screws in both side holes (Picture 2)
e. Carbon filter installation
In order to install the activated carbon filter, the grease filter should be
detached first. Press the lock and pull it downward
(Pic 1)
(Pic 2)
Exhaust pipe