Bluestone HOB-8725, User Manual

Page: 8 / 11

15 14
ENGLISH ENGLISH
NOTICE OF INSTALLATION
16. Do not operate this appliance without the filters.
17. Do not turn off the appliance directly by plugging out when operating. Turn it
off from the control panel.
18. This appliance is installed by the manufacturer, its service agent or similarly
qualified person.
19. Please pull out the plug after using. Do not unplug by pulling on the cord.
When installing the cooker hood, make sure you adhere to the minimum and
maximum distances from the cooker hood base to the hob surface. The cooker
hood should be placed 650~750mm up from the cooking plane for safe and a
good effect.
Way 1:
- To install onto the wall drill 2 holes of 08mm on a suitable place according with
the centre distance of hole in the back of the cooker hood.
- Insert the nut into the holes.
- Insert the screws into the nuts and tight. Put the cooker hood onto the tighten
screws.
- Fix the cooker hood with safety screw. The two safety vents are positioned on
the back casing, with diameter of 06mm.
- Put the one way valve onto the cooker hood.
Way 2:
- Drill 4 holes of 06mm diameter at the bottom of the hanging cupboard.
- Put the one way valve on the cooker hood, then install the cooker hood on the
bottom of the hanging cupboard, tighten the hood with enclosed 4 screws.
NOTE:
- The extensible pipe is optional accessory, not supplied.
- Take off protection film before installation.
CARBON FILTER INSTALLATION
- In order to install the activated carbon filter, the grease filter should be detached
first. Press the lock and pull it downward.
- Plug the activated carbon filter into the unit and turn it in clockwise direction.
- Repeat the same on the other side.