03
Contact
Installing chain link pin
Find out more about the Bluespot® Lifetime Guarantee at
www.bluespot.uk.com
Tel: 0800 093 0115
Email: [email protected]
Orme Business Centre,
Greenacres Road,
Oldham,
OL4 3NT
NOTE
If you find that extreme force is required please repeat step 4 above make sure that the
breaking tip is aligned with the chain link pin otherwise you risk damaging the breaking
tip. The breaking tip if misaligned could be pushing against the body of the chain and
this will result in a failure.
6. Once you have successfully removed the old chain link pin you can
disassemble to the tool.
1. Place the rivet tip and anvil in the tool.
2. Assemble the chain ready for the new link pin to be riveted. At this stage you should
not re use the old link pin as it will be weakened also do not use clip type connecting
links.
3. Take care that the side plates with pins attached lines up with the grooved press
plate.
4. Begin to tighten the push bolt. Carry this out until you can see that the link pins are
protruding.
5. Once you have completed the above remove the tool from the chain and check that
the procedure has been successful.
Summary of Contents for 07903
Page 1: ......
