background image

!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!

 

Transferring calls (Base unit to cordless handset) 

y

 

During a phone conversation through the base unit, press HOLD button then the 
cordless handset number (1-4) on the base unit. The outside line will be on hold. 

y

 

Press any key of the cordless handset, then call will automatically transfer to the 
cordless handset. 

!

Transferring calls (Cordless handset to base unit) 

y

 

During a phone conversation through the cordless handset, press the SET/HOLD   
button both    on base unit and cordless handset start ring. 

y

 

Pick up the base handset, then call will automatically transfer to the base unit. 

 
Transferring calls (cordless handset to another cordless handset) 

If extra cordless handsets are set to the base unit, 

y

 

During a phone conversation through the cordless handset, press the SET/CODE 
button then another cordless handset number (1-4) you want to transfer, both two 
cordless handsets start ring. 

y

 

Press TALK button of the transferred cordless handset, then call will automatically 
transfer to another cordless handset. 

 

Low Battery Warning 

When the handset battery voltage level is low,    the battery low icon will be displayed in the 
LCD pannel. Return the handset to the charger unit for charging. 

 
CID OPERATION 

 

VIEWING INCOMING CALLS 

In standby mode, press the CID button to view the caller list; Press “*”(DOWN) or “#”(UP) 
button to view more callers. 
CALL BACK: if you find desirednumber displayed on caller list, just press TALK button in 
cordless handset or pick up corded handset . 

VIEWING OUTGOING DIALED NUMBERS 

In standby mode, press the CHECK button on    the base or REDIAL/PASUE    button on 

handset or base unit to view the list of dialed out numbers, press “*”(DOWN) or “#”(UP) 
button to view more information. 

CALL BACK: if you find a desirednumber displayed on caller list, just press TALK button in 
cordless handset or press HAND FREE button to dial out. 

 
Selective Deleting in the Caller List 

In caller viewing mode,   
1. 

Press “*”(DOWN) or “#”(UP) button to find the number you want to delete. 

2. 

Press the DELETE button one time to delete it. 

 

Delete all records in the caller list 

In caller viewing mode, 
Press and hold the DELETE button around 2 seconds, all the records will be erased. 

 
 
 

12 

IBOEGSFF

 VOLUME 

SJOH

 ADJ

MJOF

 IN 

ED!

MDE!

TFU0DPEF!

SFEJBM0QBVTF!
DIFDL!

UBML

N4!

GMBTI0EFM!

N2!

Ō0

c

!

)Ō0VQ*!

BOUFOOB!

DIBSHF!

LFZ

 PAD 

Ŏ0

d

!

)Ŏ0EPXO*!

N3!

DJE!
DIBOOFM!

JOU

 

DPN!

Summary of Contents for CLT-789









Reviews: