BlueSky Designs Mount'n Mover TR-LT Quick Start Quide Download Page 3

Page: 3 / 4

Step 3/6 :
Tighten both corner straps using the barrel-loc

fasteners.
To use the barrel-loc fasteners, depress the

button on it (by pinching it) and then pull the
straps to tighten.

Step 5/6 :
The image shows the tray flipped upside-down

for clarity.

Clasp the center strap using the buckle, and

tighten down on the strap.

To tighten the strap, pull the loose end up
against the buckle.

2637 27

Ave. S. Suite 209 • Minneapolis, MN 55406

Ph: 612-724-7002 • Toll Free: 888-724-7002 • Fax: 888-311-4435

[email protected] • www.mountnmover.com

Rev. 10/13/2010

Summary of Contents for Mount'n Mover TR-LT

Page 1: ...uring the center of the Laptop B 2x Corner straps with barrel loc For securing the corners of the Laptop C 2x Back stops To prohibit the laptop from slipping out D 3x 6 32 x 3 8 Phillips Flat Head Scr...

Page 2: ...The same instructions apply if one is attached or not QRP to TR LT instructions can be found here Step 1 6 With the laptop open slip over the backstops and under the long strap Step 2 6 Position the l...

Page 3: ...tighten Step 5 6 The image shows the tray flipped upside down for clarity Clasp the center strap using the buckle and tighten down on the strap To tighten the strap pull the loose end up against the b...

Page 4: ...hed to a Quick Release Plate you will need to attach it to one instructions can be found here to use your laptop with the Mount n Mover You are now ready to attach the Quick Release Plate to your Moun...