G D C 4 C O R E D R I L L
2
Ø
Check to ensure the machine has fuel before starting.
o
NOTE: This machine takes unleaded fuel with octane 86 or above.
o
NOTE: Always switch OFF the engine before checking the fuel or
re-fueling. DO NOT overfill with fuel.
OPERATIONAL SAFETY CHECKS
Ø
ONLY to be operated by qualified personal who have read instructions.
o
NOTE: Failure to read and follow instructions could result in electrical shock, fire,
property damage and/or serious injury!
Ø
DO ensure all non-essential people are clear of the immediate work area.
Ø
DO be attentive at all times. Keep your eye on the work piece. Always be in a sensible state
of mind and do not use the machine if you cannot fully concentrate.
Ø
DO keep body parts, clothing & power cords clear of turning/cutting pieces. Stay alert and
use common since when using this tool.
Ø
DO allow machine to reach operating speed before starting a hole.
Ø
DO shut down machine while changing or adjusting cutting bits so as not to accidentally turn
machine on.
Ø
DO remove adjusting wrenches prior to turning the machine on.
Ø
DO be mindful that power tools can expose an operator to vibrations transmitted trough
contact with the machine. Prolonged exposure can lead to medical issues which should be
discussed with a medical professional.
Ø
DO use a dust extraction system for cutting materials that create dust. The operator should
also wear a protective respiratory device.
Ø
DO keep the engine at least 3 feet away from buildings or flammable objects during operation
as the engines exhaust can become very hot during operation.
Ø
DO NOT make adjustments to machine while the machine is running.
Ø
DO NOT switch off the machine when it is under load, except in an emergency.
Ø
DO NOT leave the machine running when not in use.
Ø
NO NOT touch the motor or motor parts while hot as burns may occur.
Ø
DO NOT hold the work piece by hand or using body. Always mechanically clamp or secure
work piece.
Ø
DO NOT allow liquids to enter the machine’s ventilation system.
Ø
DO NOT operate machine outside of machine specifications.
