Free Match for North America
2
2 Installation of the Cassette Type Indoor Unit
2.1 Schematic Diagram of Installation Spaces
BMKH24CC1
Model
H
260
unit:mm
＞
20
Wall
surface
Wall
surface
Wall
surface
Ground
surface
H
Fig.1
2.2 Installation Location of the Indoor Unit
(1).
Obstruct should be taken away from the inlet or outlet of the indoor unit so that the airflow
can be blown though all the room.
(2). Ensure the installation work is done as per the schematic diagram of installation spaces.
(3).
Select a place where is strong enough to withstand 4 times of the weight of the indoor unit;
otherwise it would incur vibration and noise.
(4). Ensure the installation place is at horizontal level.
(5).
Select a place where the condensate water is easily drained out and the drain pipe can be
easily connected with outdoor unit.
(6). Make sure that there is enough space for care and maintenance. Make sure that the
distance between the indoor unit and ground is above 1800mm.
(7). When installing the steeve bolt, check if the installing place can stand 4 times of the weight
of the units. If not, reinforce before installation. (Refer to the installation cardboard and find
where should be reinforced)
Note!
There will be lots of lampblack and dust sticking on the acentric, heat exchanger and water
pump in dining room and kitchen, which would reduce the capacity of heat exchanger, lead water
leakage and abnormal operation of the water pump.
The following treatment should be taken
under this circumstance:
1). Ensure that the smoke trap above cooker has enough capacity to obviate lampblack to
prevent the indraft of the lampblack by the air conditioner.