bluelab CTRL50110, Care And Use Manual

Page: 5 / 16

1.5 Safety information
The Bluelab
®
Powerpod
™
has been designed and tested in accordance with the IEC 61010-1:2010
standard, and has been supplied as new, in a safe condition.
This manual contains information and warnings that must be observed to keep the Bluelab
®
Powerpod
™
in a safe condition and ensure safe operation.
In order to use the Bluelab ®
Powerpod
™
correctly and safely, read and follow the precautions below
and follow all the safety instructions and/or warnings given throughout this manual that relate to
the specific features of the Bluelab
®
Powerpod
™
. In addition, follow all generally accepted safety
practices and procedures required when working with and around electricity.
WARNING
To avoid possible electric shock, personal injury or death, read the following before
installing and using the Bluelab
®
Powerpod
™
.
• Use the Bluelab
®
Powerpod
™
only as specified in this manual or the protection provided by
this product might be impaired.
• Inspect the Bluelab
®
Powerpod
™
before using it. Do not use the Bluelab
®
Powerpod
™
if it
appears damaged.
• Inspect all connected cables before using the Bluelab ® Powerpod ™ . Do not use them if any
insulation is damaged or metal is exposed. Replace damaged cables before using the
Bluelab
®
Powerpod
™
.
• Do not use this Bluelab
®
Powerpod
™
if it operates abnormally. Protection may be impaired.
If in doubt have the Bluelab
®
Powerpod
™
serviced.
• Whenever it is likely that safety protection has been impaired, make the Bluelab
®
Powerpod ™ inoperative and secure it against any unintended operation.
• Have the Bluelab ® Powerpod ™ serviced only by qualified service personnel.
• Do not apply more than the rated voltage, as marked on the product, between the power
terminals or between any power terminal and earth ground.
• Always use the power cables that are appropriate for the voltage and outlet of the country
or location in which the product is being used.
• Never remove or open the case of the Bluelab
®
Powerpod
™
without first disconnecting the
Bluelab
®
Powerpod
™
from the main power source.
• Never operate the Bluelab
®
Powerpod
™
with the case removed or open.
• Use only the replacement fuse specified by the product documentation.
• Never replace the fuse without first disconnecting the product from the mains power source.
• When servicing the Bluelab
®
Powerpod
™
, use only specified replacement parts.
4