bluelab CTRL50110, Care And Use Manual

Page: 10 / 16

TROUBLE REASON CORRECTION
Connected
equipment is not
dosing as I expect
Connectors are not fully inserted.
Check that all connectors are fully
inserted into the correct positions.
Connectors and/or cables are
damaged.
Inspect the connected cables for signs of
damage. Replace as required.
Connected equipment is faulty.
Undergo checks to ensure that all
connected equipment is operating
correctly and safely, as specified by the
manufacturer of that specific equipment.
Bluelab
®
Powerpod
™
internal fuse is
faulty.
Inspect and replace fuse as required (see
section 5.0).
Bluelab
®
Powerpod
™
is faulty. Return or replace Bluelab
®
Powerpod
™
.
My ‘next’ dosing
device is not
operating as I
expect.
Connectors are not fully inserted.
Check that all connectors are fully
inserted into the correct positions.
Connectors and/or cables are
damaged.
Inspect the connected cables for signs of
damage. Replace as required.
Connected equipment is faulty.
Undergo checks to ensure that all
connected equipment is operating
correctly and safely.
Bluelab
®
Powerpod
™
is plugged
into OUTPUT connector of Bluelab
®
Peripod ™ .
Swap order - plug Bluelab
®
Peripod
™
into OUTPUT connector of Bluelab
®
Powerpod ™ .
Put Bluelab
®
Peripod
™
’s after the
Bluelab
®
Powerpod
™
.
Bluelab
®
Powerpod
™
is faulty. Return or replace Bluelab
®
Powerpod
™
.
4.0 Troubleshooting & Specifications
4.1 Troubleshooting guide
WARNING
To avoid possible electric shock, personal injury or death, disconnect the Bluelab ® Powerpod ™
from the mains power source before performing any maintenance.
9
English