Bluegiga DKBLE, User Manual

Page: 10 / 21

Bluegiga Technologies Oy
Page 10 of 20
2 Getting Started With DKBLE
By default the modules delivered with the DKBLE have demonstration FW which prints the temperature to the
display and starts automatically advertising. Several example applications are provided with the SDK package
downloadable in the Bluegiga web pages.
To get started with the example applications navigate to
www.bluegiga.com
→
Products
→ Bluetooth 4.0 Modules
Select the module of your choice and then navigate to
Document
ation and Software → Software Releases → Bluetooth Smart Software and SDK
Download and install the package. After successful installation the tools can be found from the start menu.
Figure 6: Bluegiga tools and examples in the Windows start menu
2.1 Using the On-Board Debugger to Program the Carriers
To program the module in the carrier, connect the debugger with USB to a PC as shown in the Figure 7.
Launch the BLE SW Update Tool. Browse to select the project file for the right module carrier, and then click
“update”. After successful programming, the background of the BLE SW Update Tool turns into green (Figure
8).
Physical Dimensions of BLE121LR
1 4
.7 m
m
13.0 mm
4.8 mm
6.8 mm
8.4 mm
13
.7
m
m
3.9 mm
1.8 mm 1.8 mm
1.9 mm
Figure 7: Using the on-board debugger to program the carrier
Switch power to
”USB” and the
debugger to
”module”
The debugger is ready
when the led is green. If
the led is red, press
“reset debugger”