Bluefin LED MR48CCTH Installation Manual Download

Page: 4 / 5

Testing:

Test the light before installation ensuring that you use the correct voltage and the light is illuminated
correctly.
After installation ensure again that the light is illuminated correctly before the boat goes back into the
water and you remove the lens label.
After you boat goes back into the water check internally for water tightness around where the light is
installed.

The light has internal indicator Led’s for fault finding, these are as follows:

•

Over voltage will flash red.(check the voltage to the light)

•

Under voltage will show a constant red. (check the voltage to the light)

•

Over temperature will show amber.(allow the light to cool down and check if submerged)

Maintenance:

Regularly check the installation for water tightness
Only clean the light with a soft bristle brush

Warranty:

For any warranty issues please contact your point of sale retailer or go to

www.bluefinled.com

for further

advice.

Bluefin LED LTD warrants the lights/hardware it manufactures and produces to be free from defects in

workmanship and materials for a period of two years, starting from the date of original purchase, as

recorded on the sales receipt.

The warranty is non-transferable and limited to the original purchaser of the product. During the two

year warranty period Bluefin LED will repair or replace the defective item (at its option) at no additional

charge on a “like for like” basis. Products either repaired or replaced under this warranty shall only be

warranted for the unexpired portion of the warranty applying to the original product(s).

Bluefin LED is not responsible for labour charges to remove or replace lights or for haul-out fees. No

refunds will be given.

This limited warranty does not extend to any products which have been damaged as a result of misuse,

abuse, improper installation/modification, galvanic corrosion, failure to follow and adhere to installation

instructions provided by Bluefin LED, improper shipping, neglect, damage caused by disasters such as

fire, flood, lightning “acts of god”, installation by unqualified personnel.

Installer please ensure that the SERIAL NUMBERS of the lights are written below and the manual is
handed over to the end user.
Please make a note of the serial numbers of the lights here.
SERIAL NUMBERS