11
3) Connect the other end of the charger with power
source. (Cable to USB port or USB plug supplied)
4) After charging has finished, switch off power and
remover charger.
Notes:
If the remaining power in the battery is too low to turn
on the phone, you need to charge the phone for a
period of time, before the screen indicates the power
level in the battery.
2) Make sure that the standard voltage and power
source used is the rated voltage and power for the
charger.
3) During the charging/recharging period, you may
turn the phone on or off.
4) Use the battery only for its intended purpose. Never
use any charger or battery that is damaged.
4.4 Use of Battery
When the battery is low:
1) The battery low message displays.
2) The empty battery icon blinks.
Battery Power Notes
1) If the battery is not going to be used for a long time,
please charge the battery fully before putting it away.
2) The battery can be charged and discharged
hundreds of times, but it will eventually wear out.
When the talk and standby times are noticeably
shorter than normal, replace the battery.
3) If the battery is completely discharged, it may take a
few minutes before the charging indicator appears on
the display or before any calls can be made.
4) Your device is powered by a rechargeable battery.
The full performance of a new battery is achieved only
after 2 or 3 complete charge and discharge cycles.
