![background image](http://html1.mh-extra.com/html/bluebird/sp500/sp500_user-manual_2777347029.webp)
25
A p p e n d i x D S a f e t y
Regulatory
Appendix D Safety Regulatory
FCC compliance information
This device complies with Part 15 of the FCC’s Rules. Operation is subject to the following two Conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesirable
operation.
Part 15.105 (B)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications, However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user’s authority to operate the
equipment under FCC rules.
To comply with FCC RF exposure requirements, a minimum separation distance of 0.20 inches (0.5
cm) must be maintained between the user’s body and the back of the device. Any belt-clips,
holsters, and similar accessories containing metallic components may not be used. Avoid the use of
accessories that cannot maintain 0.20 inches (0.5 cm) distance between the user’s body and the
back of the device and have not been tested for compliance with FCC RF exposure limits.