![background image](http://html.mh-extra.com/html/bluebird/bip-3010-series/bip-3010-series_manual_2777305014.webp)
14
Copyright © 2004 Bluebird Soft, Inc. All Rights Reserved.
BIP-3010 Series
3-2. Precautions for Using ActiveSync
3.Precautions
3.Precautions
3.Precautions
A. Before getting started
①. Uninstall the ActiveSync program installed on your PC.
②. Reinstall ActiveSync 3.7. When the [Get Connected]dialog box
appears during installation, click [Cancel].
③. When installations in complete, select [File]→ [Connection Settings]
from the ActiveSync Menu. When a dialog box appears, check
“
Allow
USB connection with this desktop computer
”
, and ensure that the
message “Status: USB is available” appears at the bottom of the
window. If the [Get Connected] dialog box appears, it means that the
old USB driver that causes malfunction still exists in the PC. In this
case, remove the device in error.
Select [Control Panel] → [Management Tools] →
[Computer Management] → [System Tool] → [Device Manager]
on your desktop, and remove the device in error listed under
“Windows CE USB Devices”.
B. When the message
“
Unknown Device
”
appears after the PC detects a
USB device:
①. This message may appear when you turn on the PDA while it is sitting
on the cradle.
②. Remove the PDA from the cradle and reconnect it. ActiveSync should
work properly.
C. When the message [Connecting
…
]appears in ActiveSync for a long time
without any change:
①. Remove the PDA from the cradle to disconnect it.
②. From the ActiveSync Menu, select [File]→ [Connection Settings].
When a dialog box appears, uncheck the checkbox
“
Allow USB
connection with this desktop computer
”
and click [OK].
③. Select [Connection Settings]again. When the dialog box appears,
check the checkbox for
“
Allow USB connection with this desktop
computer
”
and click [OK].
④. Connect the PDA to the cradle. ActiveSync should work properly.
Summary of Contents for BIP-3010 Series
Page 25: ......