Blueant CT, User Manual

Page: 19 / 76

19
Reconnecting to the Earpiece
If you take your phone out of range of the earpiece for more
than 2 minutes, the Connect will go into “sleep mode” to save
battery. When you bring your phone back into range, simply
double click the Command button to reconnect.
Alternatively, use the hardware switch to turn the Connect off
whenever you are not using it. The Connect will automatically
attempt to reconnect to your phone when you switch it on.
Depending on your phone, this may take a few seconds. Please
ensure that Bluetooth is enabled on your phone.
Button Commands
Function Do This When
Activate voice
dialing, Siri or
Google Voice
Actions (if
available) on the
primary phone
Double click the
Command button
Phone
connected but
not on a call