English
2
Blueair
E Series Settings
Blueair E Series settings
POWER ON/OFF.
Press the green POWER key to turn the unit on and off. The unit
automatically runs on the highest speed for five minutes after it is turned on to provide
fast initial cleaning and then switches to Auto Mode.
SPEED
.
Press the SPEED key to regulate operating speed manually.
– Use Speed 1 for nighttime use.
– Use Speed 2 for daytime use.
– Use Speed 3 for fast initial cleaning or for larger rooms.
– Use Auto Mode to let the electronic gas and particle sensors automatically adjust the
operating speed according to the level of particles and gaseous compounds in the air.
PRESET
.
When the unit is turned off, use the PRESET key on the remote control to set
ON TIME, OFF TIME and SPEED.
ON TIME. Press the PRESET key once. Set the ON TIME by using the plus (+) and
minus (–) keys to add or subtract time in intervals of 30 minutes. The display will indi-
cate the amount of time (for instance, 1 for one hour) and count down to zero, when
the unit will turn itself on.
OFF TIME. Press the PRESET key again. Set the OFF TIME using the plus (+) and
minus (–) keys to add or subtract time in intervals of 30 minutes. The display will indi-
cate the amount of time (for instance, 4 for four hours) until the unit will turn itself off. If
ON TIME is set at 1 and OFF TIME is set at 4, the unit will turn on after 1 hour and turn
off after 4 hours of operation.
–
–
SPEED. Press the PRESET key a third time. The operating speed is shown on the
digital display. Choose between the lowest setting (1) and the highest (3 or 4, de-
pending onthe unit). Or choose Auto Mode to let the unit regulate the operating speed
based on the level of particles and gaseous contaminants in the air. TIMER. The
TIMER key has two functions: (1) to turn the unit off
–
TIMER
.
The TIMER key has two functions: (1) to turn the unit off when the unit is opera
ting and (2) to keep track of the number of days remaining until filter r eplacement ac-
cording to Blueair recommendations.
