Blueair Cabin P2i, User Manual

Page: 10 / 38

10
Getting started
1. Remove the top cover
1. Place the purifier unit
on a flat surface or car
seat and release the top
cover by pressing the left
and right release locks IN
and UP as shown.
2. Lift off the top cover.
3. Turn top cover
upside down and place
next to the purifier unit
base.
2. Install the filter
1. Remove the plastic
bag from around the
filter and pull the two
sides of the filter apart
to form a square.
2. Mount the unfolded
filter onto the purifier
base unit.
3. Remount the top
cover onto the purifier
base unit
1
IN
UP
Note:
There is no need to press the filter reset button
for initial filter installation.
3. Connect cable to unit
DC 12V
IN
1
Before installing the
unit into the car,
connect the power
cable to the power
supply port on the back
of the unit.