2. IMPORTANT SAFETY GUIDES
1) When using any electrical appliance basic safety precautions should always be followed. For your convenience
we ask that you please review and understand this entire manual before operating this machine. Also please
retain this manual for future reference regarding further maintenance and information needs.
2) Always make sure that the machine is switched to the “OFF” position before you plug it in.
3) Never place or immerse this machine in or around water or liquids of any kind except for the parts that regularly
come into contact with the food products.
4) This product is not intended for outdoor use.
5) Always provide close supervision when children are present during the use of any appliance.
6) Always make sure to unplug this machine by the plug (not the cord) from the outlet before applying, or removing
parts before cleaning and when it is not in use.
7) Never make contact with any moving parts. Always use the provided beat pusher. Never feed by hand or any
other body part.
8) Remember to never operate any machine with a damaged plug and/or cord, after any malfunction, or inspection
and or any necessaryrepairs ofr adjustments immediately. only use additional attachments or extra parts that are
provided by the manufacturer of this appliance.
9) Always plug into the correct power source.
10) Do not leave the electric cord hanging over any counter edge or table top. Only operate this machine on a sturdy
and even surface.
11) Do not use this appliance near any warm surfaces (Including cooking or baking appliances)
12) Do not grind hard foods such as bones, nuts or food with hard fibers. Avoid jamming by not using any force
while feeding food products or operating this appliance. If this unit get jammed in any way switch the unit to “OFF”
immediately and clean properly.
13) Be sure to use caution when carrying this unit. Use both hands and hold the motor housing. Please keep in mind
that this is a large and heavy appliance.
14) Bull Grinder is not resposible for any loss due to injury, misuse, neglect, alteration, or for any visible or concealed
damage caused by transfortation, flooding, fire, etc.
-2 -
3. MINCING
1) Place the head tightly on to the opening of motor housing.
2) While holding the head with one hand, tighten the locking knob clockwise.
3) Place the feed screw into the head (Long end first) by turning the feed screw slightly until it is set into the motor
housing and cover the transmission shaft.
4) Place the cutting blade onto feed screw shaft with the blade facing the front as illustrated.
- if it is not fitted properly, meat won’t be ground.
5) Place desired cutting plate next to cutting blade, align and tighten.
6) Screw cap into place until tight.
- Do not over tighten
- Place hopper plate on head and fix into position.
- Place the unit on a firm surface.
- The air passage at the bottom and the side of motor housing should be kept free and not blocked.(mincing meat)
