P.N. 80000-599
Rev. 4 08142020
CFS System
LIMITED WARRANTY
Your new Chem-Feed Engineered Skid System is a quality product and is warranted for 24 months from date of purchase (proof of
purchase is required). The system will be repaired or replaced at our discretion. The metering pump may have its own warranty and is
not covered under this warranty.
WHAT IS NOT COVERED
•
The metering pump is covered under a separate warranty.
•
Removal, re-installation, and any related labor charges.
•
Freight to the factory, or ProSeries service center.
•
Systems that have been tampered with, or in pieces.
•
Damage to the System that results from misuse, carelessness such as chemical spills, abuse, lack of maintenance,
unsuitable materials of construction, or alteration which is out of our control.
•
Systems damaged by acts of nature.
Blue-White Industries does not assume responsibility for any loss, damage, or expense directly or indirectly related to or arising out of
the use of its products. Failure must have occurred due to defect in material or workmanship and not as a result of operation of the
product other than in normal operation as defined in the system manual. System components not manufactured by Blue-White are
warrantied by their respective manufacturers. Manufacturer makes no warranty of fitness or merchantability. Purchaser assumes all
liability in determining the acceptability of the system in their specific application.
Warranty status is determined by the system serial label and the sales invoice or receipt. The serial label must be on the system and
legible. The warranty status of the system will be verified by Blue-White or a factory authorized service center.
OTHER IMPORTANT WARRANTY INFORMATION
Blue-White engineered skid systems are factory tested with water only for pressure and performance. Installers and operators of these
systems must be well informed and aware of the precautions to be taken when injecting various chemicals - especially those
considered hazardous or dangerous. Eye protection must be worn when working around this product.
Should it become necessary to return the system or system components for repair or service, you must attach information regarding the
chemical used as some residue may be present within the unit which could be a hazard to service personnel. Blue-White Industries will
not be liable for any damage that may result by the use of chemicals with their system and its components.
PROCEDURE FOR IN WARRANTY REPAIR
Contact the factory to obtain a RMA (Return Material Authorization) number. Carefully pack the system or component to be repaired.
Please enclose a brief description of the problem as well as the original invoice or sales receipt, or copy showing the date of purchase.
Prepay all shipping costs. COD shipments will not be accepted. Warranty service must be performed by the factory or an authorized
ProSeries service center. Damage caused by improper packaging is the responsibility of the sender. When In-Warranty repair or
replacement is completed, the factory pays for return shipping to the dealer or customer.
Users of electrical and electronic equipment (EEE) with the WEEE marking per Annex IV of the WEEE Directive must not
dispose of end of life EEE as unsorted municipal waste, but use the collection framework available to them for the return,
recycle, recovery of WEEE and minimize any potential effects of EEE on the environment and human health due to the
presence of hazardous substances. The WEEE marking applies only to countries within the European Union (EU) and Norway.
Appliances are labeled in accordance with European Directive 2002/96/EC.
Contact your local waste recovery agency for a
Designated Collection Facility
in your area.
5300 Business Drive, Huntington Beach, CA 92649 USA
Phone:
714-893-8529
FAX:
714-894-9492
E mail:
or
URL:
www.blue-white.com
ProSeries
by Blue-White Ind.
TMR
