AS REQUIRED BY ANSI/APSP-4 STANDARD FOR ABOVEGROUND RESIDENTIAL SWIMMING POOLS THIS
LADDER IS EQUIPPED WITH AN ANTI-ENTRAPMENT BARRIER TO PREVENT CHILDREN FROM SWIMMING
BEHIND OR THROUGH THE RUNGS OF THE LADDER. IT IS NOT INTENDED AS A SUBSTITUTE FOR COMPETENT
ADULT SUPERVISION. LADDER MUST BE REMOVED AND SECURED WHEN THE POOL IS NOT OCCUPIED; THIS
HELPS PREVENT UNAUTHORIZED ENTRY TO THE POOL AND MAY SAVE A LIFE!
Install the Anti-Entrapment Barrier as shown on Page 2 FIG. 5.
NOTE:
In FIG. 6 & 7 you see assembled Ladders with the Anti-Entrap-
ment Barrier in place on each. Be sure all the Barrier’s support brackets are properly inserted into the molded pockets on each of the steps
DET. 1. Next insert the Lock Pin into the top support bracket hole as shown in DET. 2
NOTE: The Anti-Entrapment Barrier must be installed on the Ladder section used inside the Pool!
Fig. 6
4-Foot
&
52-Inch
Ladder
Shown
DET. 1
FRAME POOL
LADDER BARRIER
INSTALLED
DET. 2
Fig. 7
RING POOL
LADDER BARRIER
INSTALLED
Should you encounter any problems, contact the Customer Service Representative/Parts Department at (800) 813-0206
from 8 AM to 5 PM Mon. thru Fri. EST. Extended operating days and hours during peak season requirements.
3-Foot
&
42-Inch
Ladder
Shown
LOCK PIN
RING POOL
BARRIER
FRAME POOL
BARRIER
51
PATENT PENDING
LADDER
BARRIER
DESIGN
