Tools required for assembly, but are not included in your set:
Phillips screwdriver
Flat head screwdriver
4. The ideal location for your solar heater
Your solar heater needs to be in a location with as much sunshine as possible.
Never position the solar heater over the surface of your pool.
The solar heater is designed to allow maximum possible capture of sunshine.
5. Product care
The solar heater should not be left connected in extreme cold weather. The solar heater
should be stored in an area protected from freezing. The solar heater should be removed
before the first frost, or at the end of the pool season.
All parts must be rinsed or cleaned with water only. Detergents may damage the
protective cover.
6. Storage
Drain all the water from the solar heater by closing off the pipes. Store the solar heater for
Winter in an area protected from freezing. Remove the pool return pipes.
Make sure there is no water left inside the solar heater as it can freeze. Freezing water
can damage the solar chambers.
C. Technical data
NS1001 FX PREMIUM DOME SOLAR HEATER - 24’ POOL
Dimensions: L x W x H 30.7”x 30.7”x 15.54” (78 x 78 x 42cm)
Maximum pressure 29 psi (2 bar) at 68
℉
(20 °C)
Water flow rate max. 2,640 GPH (10,000 LPH)
Water content collector 2.64 gal (10 l)
D. Unpacking Your Solar Heater
Carefully remove the product and all component parts from the box. Make certain all
parts are present before beginning assembly.
Refer to section H for a complete PARTS BREAKDOWN.
E. Installation instructions
1. Assembly instructions
Before you begin installation of the solar heater, turn off the filter pump and close off all
water connections.
3. Tools and accessories required
2
