STEP 2
ATTACHING THE DRAIN ASSEMBLY
If drain assembly is all together, take it apart.
Take one rubber gasket and put over threaded
part of the drain assembly. Flat part of gasket
must be flush against sealing plate.
From inside the tank insert drain
assembly through hole in bottom of
tank, you will see the threaded part on
the outside of the tank.
5
Place other gasket on threaded part of the
drain assembly that is outside of tank flat
side to the tank.
Place locking nut on threaded part and
thread until snug. Hand tighten only. Be
sure to hold drain assembly from inside
while tightening locking nut.
1
2
3
4
Place drain cap over threaded port on outside of
tank. Hand tighten only.
5
