7
ASSEMBLY
ALL TOOLS REQUIRED ARE INCLUDED!
Select a flat clean location to assemble your set - laydown a protective cloth
or cardboard to avoid scratching your set during the assembly process.
Finger tighten all parts. When an assembly is complete, tighten all
fasteners with hex key.
AA
BB
CC
EE
FF
GG
FF
EE
GG
DD
EE
FF
GG
FF
EE
GG
C
F
F
E
E
E
E
F
F
G
A
B
G
G
D
G
STEP 1: CLUB CHAIR ASSEMBLY
Place a Left Leg Frame (C) on its side with the
holes facing up on a protective surface. Attach
a Seat Frame (A) to the Left Leg Frame (C)
using 2 Bolts (E) plus 2 Washers (F). Finger
Tighten Only. Attach a Back Frame (B) to the
Left Leg Frame (C) using using 2 Bolts (E) plus
2 Washers (F) Finger tighten only.
STEP 2
Place a Right Leg Frame (D) onto the Seat
Frame, make sure the holes are facing the frame,
join the Right Leg Frame (D) to both a Back
Frame (B) and a Seat Frame(A) using 4 Bolts (E)
plus 4 Washers (F) Finger Tighten Only. Ensure
that the legs are in the correct position, then
with the Hex Key (G) start tightening each bolt a
little at a time until they are all secure. Using two
people turn the Chair to the upright position.
STEP 3
Repeat Step 2 to complete the second Club
Chair. Using two people turn the Club chair to
the upright position.
STEP 4
Place a Back Cushion (I) and a Seat Custion (H)
on each of the chairs.
HH
II
I
H
