Blue Sky Network
June 2019
Page | 21
HE7200A-BB2327 Install Guide
P/N: 200804
Speeding Event Report Status
This option will enable or disable the transmission of a speeding report when an asset is travelling at a rate
of speed that is greater than its known max speed limit.
Speeding Event Report Interval
Speeding events will be generated at this frequency when the asset speeding condition is active.
Speeding Event speed Limit
This is the max speed limit for the asset.
Speeding Event Transition Time
The device will activate the speeding event when the asset is travelling faster its known max speed limit for
this period of time.
Start Movement
Start Movement Report Status
This option will enable or disable the transmission of a moving report when the device was not moving and
then begins to move again.
Movement Threshold (kph)
The device will use this speed to determine if it should begin monitoring the activation of a start
movement.
Time Delay(sec)
When the starting speed threshold is detected the device will need to maintain a greater speed for this
amount of time before we decide the device should send a start movement event.
Stop Moving/Idle Event
Stop Movement Status
This option will enable or disable the transmission of a not moving report when the device was not moving.
Movement Threshold (kph)
The device will use this speed to determine if should begin monitoring the activation of a stop movement.
Time Delay(sec)
When the speed threshold is detected the device will need to maintain a lower speed for this amount of
time before we decide the device should send a not moving event.
Report type
The device can continue to send not moving events or it can notify only once.
Reporting Interval
If the device is supposed to continue to report not moving events it will do so at this rate.
Auto. Take-Off/Landing
Auto. Take-Off/Landing Status
Turn Automatic Take-Off/Landing ON/OFF
Take-Off Speed (knots)
When accelerating through this speed the unit will send a Take-Off message.
Landing Speed (knots)
When decelerating through this speed the unit will send a Landing message.
Min. En-route Altitude
Min. En-Router Altitude Status
Turn MEA alert ON/OFF
Altitude
At this set altitude the unit will report a special type GNSS report to SkyRouter to identify that the aircraft
has broken through the MEA.
Power Settings
Maximum Queue Length
Max Queued Messages
The maximum number of messages that the device will hold on to before determining them obsolete and
removing them from memory. Memory limits apply as well.
Event Flags
Power on
This option determines if a power on event is sent when the power button is pressed.