August 2007
Blue Sky Network
100177
D1000(A) IRIDIUM SATCOM DATA SOLUTION
Page 29
D1000(A) Power Cable
If the power harness between the circuit breaker and the D1000 (A) Modem Unit is less than 10’,
there is no need to connect two PWR wires and two GND wires to the D-Sub connector (the
diagram below shows the case scenario for a long wiring scheme – above 10’). The D1000 (A)
should work without problems if the installer chooses to only connect GND to pin 1 and PWR to
pin 2. Installation of a 3A circuit breaker is also recommended for protection purposes.
Summary of Contents for 100140
