!
BALANCED INPUT
ON
T 2A L 250 V
VAC
60Hz
85
WATTS
blue sky international
200 Sea Lane
Farmingdale, New York 11735
Replace with
Same Rating
and Type
made in China
WARNING:To reduce the risk of fire or electrical
shock, do not expose this equipment to rain or
moisture. Do not remove cover. No user serviceable
parts inside. Refer servicing to qualified personnel.
active monitor
sat 5
60W+60W
bi-amplified
120
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
AVIS: RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
designed in the USA
GAIN
REF
-3dB
-6dB
-9dB
-12dB
-15dB
-18dB -21
OFF
IN
OUT
80Hz Filter
2
3
4
5
1
6
Page
7
blue sky
ProDesk™ SAT 5 Active Satellite & SUB 8 Active Subwoofer
Owners Manual for 2.1 (Stereo) Applications Issue 1, rev 3
5. A Tour of SAT 5
1. INPUT
- The XLR input is electronically balanced and should
be connected to the output of the subwoofer or other bass-
management controller. Do not connect more than one source
to this input. Refer to the wiring table below for wiring custom
cables and connectors.
2.
HIGH PASS FILTER SWITCH
- This switch will turn on the 80Hz
High-Pass fi lter that is required when using the SAT 5 in a 2.1
system with the SUB 8. This switch should be in the “OUT”
position only when the SAT 5 is used with the SUB 12 or in a 5.1
system when being used with the BMC. Visit www.abluesky.com
for more information on the BMC and SUB 12.
3.
GAIN & POWER CONTROL & LED
- This knob controls input
sensitivity. When set to the reference position, a 200mv signal at
the input equals 90dB of output at one meter. Below the knob is
the power indicator LED.
4.
IEC POWER TERMINAL
- Connect to 120 Volt AC / 60Hz power
source, rated for 85 WATTS. Use the included IEC Power Cable.
5. FUSE
– 2.0 Amp Slow Blow Fuse - Replace with same rating and
type. This fuse is for 120 VAC / 60Hz operation only. For products
purchased in countries outside North America, please see the
FUSE and POWER addendum included with this product.
6. POWER
SWITCH
- Controls the power to both amplifi ers and all
internal electronics.
7. OmniMount® INSERTS
(located on the bottom of the speaker
cabinet) – The SAT 5 comes standard with four ¼ X 20 inserts
that match OmniMount® Series 30 brackets (formerly known as
the 75 series). OmniMount® Series 30 brackets are rated for up
to 25 pounds of weight. For more information regarding the many
mounting brackets available from OmniMount®, please visit the
Omnimount® website www.omnimount.com, or contact your
pro audio retailer.
