Blue Sky Design BugE, Owner'S Manual

Page: 16 / 23

16
Brakes:
The brakes are drum type. The brake shoes can be replaced with Tomas brand
parts also available through Motorcycle shops. The brakes should be checked
occasionally for wear and adjustment.
The brake cables can be adjusted to compensate for brake wear by turning the
cable adjusters on the ends of the brake levers.
Chain:
The chain is a motorcycle type# 420 chain. Replacement chain is available at
Motorcycle shops. The chain should be kept oiled and adjusted by loosening the
rear wheel axle and then pulling any slack out of the chain and retightening the
rear wheel axle securely.
Canopy:
The Acrylic canopy should be kept clean with a cotton rag and furniture polish
such as lemon Pledge. Scratches can often be buffed out with plastic polish
available at Plastic Supply stores.
If the Canopy is cracked, it often can be repaired by drilling a small 1/8 hole in
the end of the crack to keep it from continuing. The crack can then be repaired
with Acrylic glue available at Plastic supply Stores.
WARNING: Do not operate the BugE with a cracked or broken
canopy. It can shatter and cause injury.
The canopy can be replaced by removing the front Turn signal attachment
screws and then gently separating the Velcro perimeter tape.
Notice: Modifications for an Open Cockpit mode are included in the
Assembly Manual. (See Replacement Part Order Form)
The fiberglass Fairing, Fender Pan, Seat and Battery Pan should be kept clean
using a furniture polish such as Lemon Pledge or automotive waxes.
These parts can also be painted with automotive paints. Contact an auto body
shop for details.
Repairs to the fiberglass parts can be done by fiberglass repair shops using
Polyester cloth and resin. Replacement parts are available on the Replacement
part order form.
Trouble shooting:
In most cases, a problem is obvious due to damage or wear and tear. Most
electrical problems are due to Battery failure or a Switch in the Off position.