10
SMW 15
1.1
GENERAL DESCRIPTION
The dishwasher of the SMW 15 give an excellent idea of
the know-how achieved by Blue Seal in the field of machines
for catering sector.
1.2
TYPE OF USE AND IMPROPER USE
These machines have been designed and built to wash
object in special baskets and using detergent and rinsing
agent.
•
Use of specific detergents and rinsing agents for
industrial purposes normally available in the shops is
permitted.
ATTENTION
Any improper use of the machine relieves the manufacturer
from all and every responsibility for accidents or damage
to persons and property, also voiding all conditions of
guarantee.
1.3
TRANSPORT, SHIPMENT AND
STORAGE (Fig. 2)
-
The machine is normally shipped in a cardboard box
closed by straps.
-
When transporting the packed machine, use a lift truck
or transpallet, positioning the box on the relative forks.
ATTENTION
The machine must be sheltered from the weather when
shipped and stored.
ATTENTION
Before installing the machine, control the rotation
way of the motor (Fig. A).
1.4
INSPECTIONS ON ARRIVAL
When the machine arrives, check that the packaging is in
a perfect condition and that there is no visible damage.
If everything is in order, remove the packaging (unless
other instructions have been received from the
manufacturer) and check that the machine is free from
damage caused by transport.
Now check whether there has been any damage to the
structure, crushing or breakages.
If damage or imperfections are discovered:
1 - Immediately notify the haulage contractor both by
phone and in writing by registered letter with return
receipt attached;
2 - Inform the manufacturer by registered letter (with return
receipt attached).
IMPORTANT
Norification of damage or faults must be immediate, in any
case within 3 days from the date on which the machine is
received.
1.5
UNPACKING (Figs 2-3-)
Proceed in the following way in order to remove the
packing:
1. Cut the straps (7) that hold the cardboard in place.
2. Remove the box (8) by lifting it upwards.
3. Remove the protective film from the machine.
4. Remove the machine from the base by lifting it from the
lower part of the casing.
5. All packing must be collected and not left within children’s
reach since it could become a source of danger. The
packing can be disposed of in the same way as solid
urban waste.
Lift the machine by raising the lower part of the casing
using a lift truck or transpallet.
1.6
MACHINE IDENTIFICATION (Fig. 4)
-
The serial number and machine data are stamped on
the data plate (9) affixed to the rear part of the machine
itself.
IMPORTANT
Always state the model and serial number of the machine
when requesting technical assistance or ordering spare
parts.
1.7
DESCRIPTION OF THE SAFETY
DEVICES
•
Model SMW 15 are equipped with a safety microswitch
that blocks the washing pump if the tub access door is
accidentally opened, and of other electronic safety
devices.
•
The electrical parts are enclosed by panels locked by
screws.
•
The machine is fitted with an equipotential ground
conductor ( 10 Fig. 6).
•
Safety overflow to prevent water from spilling.
1.8 REFERENCE STANDARD
•
The machine and its safety devices has been built in
compliance with the following standards:
•
Essential safety requisites pursuant to Directive 73/23
EEC Annex 1 modified by Directive 93/68 EEC,
Directive 89/336 CEE, 89/392/CEE, 92/368/CEE,93/
68/CEE.
ENGLISH
Fig.A
