9
PARTICULAR RECOMMENDATIONS
FOR THE OPERATOR
-
Do not operate the machine without having become fully
familiar with the contents of this manual and without having
acquired a comprehensive knowledge of the specific
techniques and machine controls.
-
Check that the area in which the machine is to be installed is
compatible with the dimensions of the machine itself before
installing this latter.
-
Only use lifting and handling means that are suited to the
weight of the machine when this must be installed or removed
either completely or in part.
-
Never allow unauthorized or unqualified personnel to start,
adjust, operate or repair the machine. Always refer to this
manual for the necessary operations.
-
The mechanical parts and electrical/electronic components
situated inside the machine are protected by entirely closed
panels.
-
Always ensure that the main switch has been set to the
“OFF” position before cleaning and/or servicing the machine.
This will disconnect the power source during the operator’s
intervention.
-
The electrical powering system must be equipped with an
automatic release system prior to the main machine switch
and with a suitable grounding system that complies with all
the requisites established by industrial provisions for the
prevention of accidents.
-
Always disconnect the power source if work must be carried
out on the main switch or in its vicinity.
-
All inspections and maintenance operations requiring removal
of the safety guards are carried out under the complete
responsibility of the users.
These operations should therefore only be carried out by
specialized and authorized technical personnel.
-
Make sure that none of the accident preventing safety
devices (barriers, guards, casings, microswitches, etc.) have
been tampered with and that they are all perfectly functional
before operating. These devices should be repaired if this is
not the case.
-
Never remove the safety devices.
-
To prevent personal risks, only use power tools that are
correctly connected to the grounding tap and that conform to
the national safety regulations.
-
Never ever tamper with the electrical system or with any other
mechanism.
-
Never ever use the hands or unsuitable instruments to
locate leaks from pipes. Air, fluids under pressure or irritants
could cause serious damage to both persons and/or property.
-
Never use the hands instead of adequate tools when operating
the machine.
-
Never use the hands or other objects to stop moving parts.
- PAY THE UTMOST ATTENTION TO THE DATA PLATES
AFFIXED TO THE MACHINE WHENEVER WORKING ON
THIS OR IN THEIR NEAR VICINITY.
-
The user is obliged to keep all the data plates and stickers in
a legible condition.
-
Never climb on to the door or on to the top of the machine.
-
It is essential for the user to replace all data plates and
stickers that may have deteriorated for any reason or that are
not clearly visible, ordering new ones from the Spares
Service.
-
Contact the person in charge of maintenance in the event of
malfunctions or damage to the machine components without
proceeding with further repairs.
-
It is absolutely forbidden for anyone to use the machine for
purposes other than those explicitly established and
documented. The machine must always be used in the ways,
times and places dictated by common sense and the laws in
force in each country, even when there are no specific
provisions to govern the sector in the particular country of
use.
-
The manufacturer declines all responsibility for accidents
or damage to either persons or property as may arise
following failure to comply with either the relative safety
provisions or the instructions herein.
-
These instructions, together with the provisions
governing machine installation and electrical
connections form an integral part of the Accident
Preventing Industrial regulations in force in each
individual country.
-
THESE SAFETY PROVISIONS INTEGRATE AND DO NOT
SUBSTITUTE THE SAFETY PROVISIONS LOCALLY IN
FORCE.
-
NEVER ever make hurried or inaccurate repairs that
could jeopardize the correct operation of the machine.
-
ALWAYS ASK FOR HELP FROM SPECIALIZED
PERSONNEL IN CASE OF DOUBT.
-
ANY TAMPERING BY THE USER RELIEVES THE
MANUFACTURER FROM ALL LIABILITY, THE USER
BEING IN THIS CASE SOLELY RESPONSIBLE TOWARDS
THE COMPETENT ACCIDENT PREVENTION
AUTHORITIES.
ENGLISH
