Blue Seal Fast-Fri E43, Installation And Operation Manual

Page: 36 / 39

34
Controller Advanced Programming Mode
Temperature Display Mode
The temperature display can be set for two temperature display
modes:-
't -1’ - Display will show the oil temperature as an actual temperature.
’t - 0’ - The display will show the following temperature status;
‘ HEAt’ - Awaiting for fryer to heat up to set temperature.
‘ droP’ - When the fryer is within 10° of the set temperature
to indicate that fryer is ready for loading.
8. One of the following options will display:-
9. Press either 'Timer 1 - Up’ key or 'Timer 3 - Down'
key to select the option required.
10. Press the 'Program' key to confirm the options, the
change will be accepted and the display will step on
to the next parameter.
Programming the ‘Melt Cycle’.
11. The user may select from ‘L’ (Liquid), ‘S’ (Solid) or ‘O’ (Override).
12. To change the ‘Melt Cycle’ press either 'Timer 1 - Up’
key or 'Timer 3 - Down' key to scroll down through
the selections.
13. Press the Programme Key ‘P’ once the desired ‘Melt
Cycle’ is selected, the change will be accepted and the
display will step on to the next parameter.
Factory Default Settings
HEAt
droP