33
Controller Advanced Programming Mode
With mains power to the fryer turned ‘On’, press the ‘ON /
OFF’ key to turn ‘On’ the appliance.
1.
Enter the ‘Advanced Programming Mode’, by pressing
the Programme Key ‘P’ and 'Timer 1' key
simultaneously.
Timing Mode
2.
One of the following options will display:-
Straight Cook Time
Straight cook time refers to real time cooking.
Flexible Cook Time
Cook time can be automatically adjusted to
compensate for load size being cooked.
3.
To change the 'Timing Mode', press either 'Timer 1 -
Up’ key or 'Timer 3 - Down' key.
4.
Press the 'Program' key to confirm the options, the
change will be accepted and the display will step on
to the next parameter.
Temperature Offset
To calibrate the thermostat control of the display
temperature in relation to the oil temperature, the display
temperature can be adjusted by between -14° to +14°.
To Calibrate the Control Temperature
•
Set the control temperature to 170°.
•
Measure the oil temperature that the control is cycling at.
•
If the oil temperature is
higher
than the reading on the control panel, enter a
positive
value of the
difference between the oil temperature and the set temperature (170°).
•
If the oil temperature is
lower
than the reading on the control panel, enter a
negative
value of the
difference between the oil temperature and the set temperature (170°).
5.
The temperature offset will appear on the screen.
6.
To change the temperature offset option, press either
'Timer 1 - Up’ key or 'Timer 3 - Down' key to change
the selection required.
7.
Press the 'Program' key to select the temperature
display mode.
Controller Advanced Programming Mode:
Factory Default Settings
O°
Press
Together
Factory Default Settings
Summary of Contents for Fast-Fri E43
