18
Gas Conversion and Specifications
Add Shot of Low
Fire Adjustment
point
Fig 15
Oven
Injector:
1.
With the gas supply turned off at the main supply,
unscrew and remove the 6 screws securing the lower
lintel to the front of the oven.
2.
Open the oven door and remove the vitreous
enamelled tray from inside the oven.
3.
Remove the 2 screws securing the oven burner in the
oven and remove the main burner from the oven.
4.
The main injector will now be exposed and can be
unscrewed and removed using a 13mm (
1/
2
” A/F)
spanner.
5.
Remove the main injector and replace with the correct
size injector. (Refer to the ‘Gas Specifications’ table at
the rear of this section).
6.
Refit the main burner to the oven and secure in
position with the 2 screws.
Pilot:
1.
To remove the oven pilot injector, from inside the
oven, unscrew and remove the thermocouple and
piezo igniter from the mounting bracket.
2.
Unscrew the hex nut holding the pilot supply tube to
the rear of the pilot assembly.
3.
Withdraw the pilot injector from the pilot assembly.
4.
Replace the pilot injector with the correct sized
injector for the gas type being used and re-connect
the pilot supply tube to the pilot assembly.
5.
Refit the vitreous enamelled tray to the oven.
Low Fire:
1.
To change the thermostat ‘Low Fire’ screw for the gas
type required, remove the gas control knob from the
oven control panel. The control knob is a push fit onto
the shaft of the oven gas control valve. Remove the
gas control knob.
2.
Unscrew the single screw at the top of the oven
control panel, securing the panel and rotate rearwards
and lift the panel away from the oven.
3.
Unscrew and remove the old ‘Low Fire’ screw from the
lower left hand front of the valve and fully screw in the
new ‘Low Fire’ screw for the new gas type. (Refer to
the ‘Gas Specifications’ table at the rear of this section
for screw types).
4.
Close the control panel and secure with the securing
screw.
5.
Refit the oven gas control knob to the spindle of the
oven gas control valve.
Main Injector
Pilot Supply Line
Thermocouple
Piezo Igniter
Pilot Assembly
6 screws
Shown with door removed for ease of viewing
Fig 17
Fig 18
Fig 19
Low Fire
Screw
Fig 20
Summary of Contents for Evolution G570
Page 7: ...5 Dimensions G570 ...
Page 25: ......
