(866) 455-2135
blueoxaircleaners.com
Blue Ox is a Product of Air Cleaning Specialists, Inc.
BLUE OX products are designed to improve your environment. OX3500C series collects dust, smoke, oil mist,
oil smoke, and other atmospheric pollutants in industrial plants, shops, schools, and factories with high
efficiency, 2 or 3 stage filtration. It is a complete air filter packaged unit that can be installed easily and used
as a free hanging air filter unit to clean the ambient pollutants, smoke and haze.
The OX3500C
consists of a 4” pleated pre
-filter that traps dust and larger particles. The second stage, micro-
glass multi-pocket bag filter has 98% arrestance and either 65 or 95% efficiency (depending on the application)
on the atmospheric dust spot test, removing smoke and other submicron size particles from the air. Changing
out the filters is ea
sy as it requires no tools. The 4” pre
-filter pulls from the unit and can be replaced. The
main
filter is located directly behind the 4” pre
-
filter and pulls out also. For light odors, there is an optional 2”
50%
bypass charcoal after-filter available.
MOTOR
The OX3500C is a belt driven unit. The motor must be protected externally via breaker and disconnect switch.
OPERATION
Do not operate your unit(s) without filter for more than a few minutes at a time.
MAGNEHELIC PRESSURE GAGE OPTION
This is an option to help determine when to change the filters. As the bags fill with contaminants, the needle
on the gage will rise. We recommend changing the bags between 1.25
–
1.50 above the reading with clean
filters. It is normal to change the pleated twice (or more) as much as the inside bag filter. After the pleated has
been change and there is no longer a drop in pressure, then it is time to change main filter. The reading may
vary depending upon the contaminants. Please consult your Sales Engineer for further information.
FILTERS
All units are equipped with replaceable type media filters. In some cases, where contaminants being picked up
are dry, it is possible to blow the pre-filters and reuse them. Filters are available in a number of different
degrees of efficiencies. The filters in your new OX3500C unit have been selected by your representative to best
collect your particular type of contaminant.
Media type filters actually become more efficient as they load with contamination. However, as the filters load
up, the air flow volume will decrease and eventually will reach a point where they must be replaced to restore
the original air flow. Changing the filters in your new OX3500C air cleaner is really easy. Old filters are
simply pulled out of the entrance end of the unit and new filters are installed. No tools are required. Turning
the unit on when installing new filters will help to pull them into place.
GENERAL NOTE: CLEANING AND INSPECTION OF CABINET
After the dirty components have been removed, inspect the cabinet interior. Remove foreign material, wipe
interior, and clean all filter seating surfaces.
When installing new filters the opening in the bag filter and the pre-filter should be in a vertical position. Be
sure the cloth part of the bag does not bunch up between the bag header and the angle iron filter stops on the
cabinet. The pre-filter should be installed with the wire mesh to the inside of the unit. Replacement filters can
be supplied by your representative.
LOUVERS
Four way lovers are provided on all units to permit you to direct the discharge air away from pilot lights on
heaters and to help you obtain the best air flow pattern for maximum cleaning.
PARTS
ALWAYS USE BLUE OX REPLACEMENT FILTERS & PARTS TO MAINTAIN WARRANTY.
TO ORDER REPLACEMENTS PARTS: CALL 866-455-2135 | EMAIL
11088 Gravois Industrial Court, St. Louis, MO 63128
