BX2635
2009-14 Ford F150 (No Raptor/King Ranch)
(Includes EcoBoost
)
2015-16 Ford Expedition, Lincoln Navigator
(Includes EcoBoost & ACC)
2015-17 Ford F150
Installation Instructions
405-0253 Rev D
Page 8 of 10
10/25/2016
1. Using a Phillips screwdriver, remove the
twelve (12) push pins from the top edge of
the fascia cover. There are six (6) on each
side. Set the cover aside.
2. Using a T30 Torx, remove the four (4)
screws from the top edge of the grille
(gray). There are two (2) on each side.
Using a 10MM socket, remove the outer
fascia screw (white). Do this on both sides
of the vehicle. On the passenger side only,
remove the two (2) hood latch screws.
3. Using a 10MM socket, remove the three
(3) screws from the edge of the wheel
well. Along with the two (2) screws up
inside the wheel well along the fascia joint.
Do this on both sides of the vehicle.
4. On the underside of the fascia towards the
middle, remove the two (2) push pins.
Pull the corners of the fascia away from
the vehicle disconnecting any electrical
connections and set the fascia aside.
Navigator Fascia Removal
continue to page 9 for baseplate installation
