BX1975
2007-12 Dodge Caliber (No SRT)
Installation Instructions
292-2883 Rev F
Page 3 of 9
4/8/13
Item No.
Part No.
Description
Qty.
1.................................61-6316 .............................BX1975 Baseplate ...........................................................1
2.................................61-5208 .............................3/8”-16 Nut Plate w/ 14” Wire ..........................................3
3.................................102-6753 ...........................BX1975 DS, Spacer Plate ...............................................1
4.................................201-0443 ...........................3/8”-16 x 1” Hex Head Bolt, Grade 5, ZP ........................2
5.................................201-0440 ...........................3/8”-16 x 1-1/2” Hex Head Bolt, Grade 5, ZP ..................4
6.................................201-0404 ...........................3/8”-16 x 1-3/4” Hex Head Bolt, Grade 5, ZP ..................2
7.................................203-0010 ...........................3/8” Lock Washer, ZP ......................................................8
8.................................202-0003 ...........................3/8”-16 Hex Nut, ZP .........................................................5
9.................................201-0553 ...........................1/4-20 x 1/2” Hex Wshd Bolt Type F TCS, ZP .................2
10...............................201-0192 ...........................#10-32 1/2” Round Slotted Head Screw ..........................2
11 ...............................203-0054 ...........................#10 Lock Washer, ZP ......................................................2
12...............................202-0047 ...........................#10-32 Hex Nut ...............................................................2
13...............................101-5822 ...........................4 Way Connector Adapter ...............................................2
14...............................62-3468 .............................Attachment Tab Assembly with Hole ...............................2
15...............................226-0046(not shown) ........Class III Safety Cables ....................................................2
16...............................229-0359(not shown) ........3/8” Quicklink, ZP ............................................................2
17...............................290-0437(not shown) ........Black Cap Plug Receiver .................................................2
Tools Required
Large Vise Grip
Flat Screwdriver
Utility Knife
Phillips Screwdriver
Torque Wrench
Drill
Reciprocating Saw
Tape Measure
Loctite
®
RED
13/32” Drill Bit
1-1/4” Hole Saw
7MM Socket
10MM Socket
13MM Socket
9/16” Socket
9/16” Wrench
T30 Torx
Important:
Use only genuine factory replacement parts on your baseplate. Do
NOT
substitute homemade or non-typical parts. If a bolt is lost or in need of
replacement, for your safety and the preservation of your baseplate, be sure to use a replacement bolt of the same grade (In most cases it will be Grade
5, please reference the parts list above). Replacement parts may be ordered through your nearest Blue Ox® Dealer or Distributor. Failing to follow and/
or altering these installation instructions in either installation or required equipment will void the manufacturer’s warranty. Towing behind a non-motorized
vehicle will void the warranty.