DroneScout Receiver Manual - version 1.0 May 2022 - © BlueMark Innovations BV 2022
6/28
Figure 1 - DroneScout 230-serie receiver
1.3 Installation
Summary
Install the receiver to a wall or pole mast using the included mast mount.
Connect/screw the 3 antennas to the antenna connectors on the enclosure.
Powering up the receiver
without antennas
may
damage
the Bluetooth and WiFi radios.
Removing or attaching antennas
when the
receiver is powered up
, will
damage
the
Bluetooth and WiFi radios.
Connect the receiver to Ethernet and for outdoor installations make sure this connection is
waterproof (by using the included waterproof accessories). This Ethernet cable needs to have
power (PoE 802.3af/at) and also connectivity. The receiver acts as a DHCP client in the network.
Location
- The receiver detects remote ID signals from all directions, it is
omnidirectional
. For
installation, it is therefore important not to install receivers near the border of the detection area,
but instead in the center. It also depends a bit on the situation. If you have nearby WiFi networks,
