Product Manual
Tel: +0086-023-86850812
Email:[email protected]
Fax:+0086-023-67636974
Add: Building 13, 2-8, Jialing third village Pioneer Park, Jiangbei District, Chongqing
6
6.- Setup procedure
The SETUP procedure of the
BJ-S-W1S1-K2-S
is performed by means of several SETUP options.
Once into the SETUP, use the keyboard to select different options and enter required variables:
Password enter
A 3-figure password is required to be entered (in case that this password is not correct, will
not be set on the meter).
At normal display mode, press
to enter the programming mode, meter display, then
press
;
Controller display “
”,
Ask for the password. Press
and
to increase or decrease the number, to switch
password. After password switch press
to confirm the input.
If password is correct, meter can enter next setting.
Temperature control value
Probe 1 Temperature alarm value
When probe 1 detect temp raise/decline this
value will act contactor 1(K1)
Probe 1 Hysteresis value
After probe 1 over the trig value, will reverse
down the value can release contact action.