6
TO AVOID SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE:
For your safety, do not store or use gasoline or other flammable vapors or liquids
in thevicinity of this or any other appliances. Keep the area free and clear of
combustible. ( SeeANSI Z83. 14B, 1991).
Improper installation, adjustment, alteration, service or maintenance of this equipment can cause property
damage, personal injury, or death and voids warranty. Read the installation
operating and maintenance instructions thoroughly before installing, or
operating this equipment.
Instructions must be posted in a prominent location. All safety precautions must
be taken in the event the user smells gas. If you smell gas, immediately shut off
the main gas valve,extinguish all heat and flames, and call 911. Safety information
can be obtained from your
local gas supplier.
IMPORTANT SAFEGUARDS & SAFETY INSTRUCTIONS
When using gas cooking equipment, basic safety precautions should always be
followed, including the following:
The hot plate burners, cooking grates and outside surfaces may become HOT after use. Use caution when
touching the unit.
·
Never directly touch the burners or cooking grates while the hot plate is on.
·
Always turn off the unit when not in use, servicing or adjusting any parts or attachments, and before cleaning.
·
Never leave the hot plate on overnight.
·
Do not operate any equipment with a damaged or leaking gas line, ignitor or valves or if the unit is dropped or
damaged in any manner. Call for service.
·
The use of attachments not recommended or sold by the manufacturer may cause fire, injury or even death.
·
Do not use outdoors.
·
Do not use this equipment for any use other than the use intended by the manufacturer.
·
Never use the hot plate as a heating source
·
The hot plate does not contain anyuser-serviceable parts. Dealers or recommendedqualified technicians
should carry out repairs. Do not remove any components or service panels on this product.
·
Never bypass, alter, modify or attach any unauthorized parts to this equipment. Doing so may create hazards
and will void warranty
·
Supplier takes every care to ensure that all products are safe. Steel cutting procedures used to manufacture
these items result in sharp edges. These sharp edges are removed to the best of our ability; however, we
insist the operator take care when in contact with this piece of equipment.
·
Always keep hands, hair and clothing away from heating source.
·
Allow the hot plate to cool down after use and before dismantling for cleaning; the unit will be too hot to
handle immediately after use.